902S*20*SCK01

FO clamp connector SC metal ferrule for 200/230µm PCF cable with protection boot

This connector, designed for 200/230µm PCF fiber uses an assembly without crimping and glueing. A patented clamp system integrated into the connector body holds the glass fiber, the strain relief and the cable jacket in place after assembly. Also, it is possible to disassemble the connector and reuse it several times. This big advantage makes it easy to repeat an assembly if the demanded optical parameters are failed after finishing. Additionally, there is no need for expensive tools like heat oven or crimp pincers and an enormus time saving while no crimping, glueing and heat cureing is needed. Fiber endface preparation is done by hand thru scribing and breaking or, to get repeatable results, using the special designed fiber cleaving tool from Ratioplast-Optoelectronics. By using a duplex adapter the connector can be a duplex SC standard version connector.

Connector type	SC
Ferrule type	metal, PCF
Outer diameter	2.5 mm
Inner diameter	235 mm
Protection class	–
Assembly type	clamping
Accessories	910FW230SC001 Cleaving tool for SC fiber optic clamp connectors 200/230µm PCF 910AB00100001 Fiber stripper
Ordering information	902SS201SCK01 for cable diameter 2.2mm, simplex902SD201SCK01 for cable diameter 2.2mm, duplex902SS202SCK01 for cable diameter 2.5mm, simplex 902SS203SCK01 for cable diameter 3.0mm, simplex 902SD203SCK01 for cable diameter 3.0mm, duplex
Addtional information	By using a duplex adapter the connector can be a duplex SC standard version connector