XCONPA557P

CON-PA-557P Converter for potentiometer 1–6kΩ/ output 0–10V,0–20mA,4–20mA
Input: 0…1kΩ / 0…6kΩ potentiometers
Output: 3 selectable ranges
Insulation: 2.5 kVac, 3-way isolation

Series CON
Code XCONPA557P
Type CON-PA-557P
INPUT TECHNICAL DATA
HS code 85043129
Signal type IN potentiometers
Input range IN 0…1 kΩ / 0…6 kΩ
Input impedance IN 1 MΩ
Parametrization IN DIP switch
OUTPUT TECHNICAL DATA
Signal type OUT analogue
Output range OUT 0…10 V / 0…20 mA / 4…20 mA
Maximum output signal OUT 16 V (current output) / 5 mA (voltage output)
Load impedance OUT >2 kΩ (voltage output) / < 700 Ω (current output)
Ripple <20 mV
Status indication LED
Parametrization OUT DIP switch
GENERAL TECHNICAL DATA
Power supply voltage 24 Vac/dc (19.2…26.4 Vdc / 19.2…26.4 Vac)
Current consumption 13 mA (24 Vdc) / 22 mA (24 Vac)
Accuracy 0.3% FSR (23°C)
Linearity error ±0.1% FSR
Temperature coefficient <150 ppm / K FSR
Transmission frequency 10 Hz 3dB
Operating temperature range -25…+60°C
Insulation 2.5 kVac / 60 s
Insulation type 3-way (IN / OUT / power)
Standard approvals EN 60947-5-1
Overvoltage category / pollution degree II / 2
Protection degree IP 20
Connection terminal IN / OUT 2.5 mm² / 2.5 mm² (push-in)
Housing material UL94V-0 plastic material
Dimensions (LxHxD) 6.2x93x73 mm
Approximate weight 29 g
Mounting information on a rail, side by side
ACCESSORIES
Mounting rail (IEC60715/TH35-7.5) PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
APPROVALS AND MARKINGS
LOGO_CE.png